Key Functions; Setting The Device; Counting Function - Domyos HG 90 BOXE Modo De Empleo

E
INSTRUCTIONS FOR THE HG90 CONSOLE

KEY FUNCTIONS

Button 1:
For switching from counting mode to program
mode.
Press down for a long time on this button to switch
the device to setting mode.
In setting mode, this button is used for switching
from one settable parameter to the next.
Button 2:
For scrolling through the values programmed in
setting mode.
Press down for a long time to make the values
scroll faster.
The device can run in two different modes: simple counting mode or programmable mode, for programming the number of sets, the number
of reps and the rest time between each set
This function counts the number of movements made with the machine. This value can be from 0 to 9999. Once 9999 has been reached,
the counter automatically resets to 0.
You can reset this value to zero. To do so, go to counting mode with
button 1, and then press down for a long time (2 seconds) on button
1. The following screen appears:
N G

SETTING THE DEVICE

Example of screen
in simple counting mode

COUNTING FUNCTION

L I S
1
Example of screen
in programmable mode
Pressing on button 1 will reset the value to zero. If you want to exit
this mode without resetting the value to 0, press once on button 2 to
display the following screen:
Then press on button 1 to exit reset mode.
26
H
2