Inserting The Batteries - Domyos HG 90 BOXE Modo De Empleo

E
This function is for programming a number of sets, a number of reps and also a rest time.
This means that you can do an exercise with the machine monitoring you. The screen and various sets of beeps will help you gauge where
you are in your exercise.
When sound mode is activated, a beep sounds for each count. Two sets of 2 beeps with a rest time in the middle sound at the beginning
or end of the rest time. Two sets of 5 beeps with a rest time sound at the end of the exercise and the screen displays the message: STOP.
To set the different values for this mode, hold down the '1' but-
ton for two seconds when you are in programmable mode.
First, you can program the number of reps. The following screen
is displayed:
You can program this value between 1 and 99 by pressing on
button 2 when you have reached the desired value
press on button 2 and you switch to setting the number of sets:
You can program this value between 1 and 50 by pressing on
button 2 when you have reached the desired value
press on button 2 and you switch to setting the rest time, starting
with minutes:
The display comes on automatically when a movement is detec-
ted or when button 1 is pressed.
1. Remove one of the panels of the fabric cover, using the self-fas-
tening straps
2. Remove the console and place two type AA or UM-3 batteries in
the battery compartment behind the screen.
3. Verify that the batteries are positioned properly and that they are
in snug contact with the springs.
4. Put the assembly back together and check to ensure that it is stable.
5. If the display is illegible or partial, please remove the batteries,
wait 15 seconds and then put them pack in.
6. The unit's memory is erased when you remove the batteries.
N G
PROGRAMMABLE FUNCTION
AUTOMATIC ON AND OFF

INSERTING THE BATTERIES

L I S
The minutes can be set between 00 and 59, by pressing on but-
ton 2. If you press on button 1 you switch to the seconds setting
mode. Seconds can also be set between 00 and 59.
After setting the rest time, pressing '1' enables you to activate,
or not, the sound on the product. You then get the following
screen:
When ON is displayed, sound mode is on. To turn the sound
off, press on button 2. The following screen is displayed and the
sound has been turned off:
Once you have chosen the mode, you can exit setting mode by
pressing on button 1.
The device goes into sleep mode automatically if it is not used for
ten minutes. This sleep function is deactivated in program mode
if the rest time programmed is longer than 10 minutes.
RECYCLING:
The 'crossed out dustbin' sign means that this product
and its batteries cannot be thrown out with domestic
waste. They should be treated apart. When you have
finished with them, drop them at an authorised collection point so
they can be recycled. This gesture will go towards protecting the
environment and your health.
27
H