Mahr MarSurf PS 10 Traducción Del Manual De Instrucciones Original página 29

Order no. Last modification
3763315 08/11/2016
Contents
Information about open source
software ....................................................... 1
Permitted uses ............................................ 2
Reasonably foreseeable misuse ........... 2
Disposal ......................................................... 2
Safety instructions .................................... 3
1 Functions .........................................4
2 Operating elements ....................6
3 Getting started .............................7
4 Setting up the measuring sta-
tion ....................................................9
5 Adjusting the settings ..............11
5.1 Displaying a customer-specific logo
in the measuring record .................................15
5.2 Transferring measuring results
by MarCom software .......................................16
6 Maintenance, cleaning
and transport ..............................17
6.1 Checking the integrated standard ..........18
6.2 Replacing the battery ......................................19
6.3 Installing software updates ..........................19
7 Package contents ...................... 20
8 Accessories,
spare and wear parts ................21
Mahr GmbH, MarSurf PS 10
Version
Valid from software version 1.00-14
For detailed technical data, please see
i
data sheet 3763438.
For the declaration of conformity, please
see the last page of the volume.
Information about open source software
Some of the components contained in the soft-
ware used in this product by Mahr GmbH are
licensed as open source software (OSS).
Mahr GmbH accepts no liability for the parts of
the open source software not used in this prod-
uct. The copyright for such parts is held by one
or more authors.
To read the versions and licenses of the OSS
packages contained in the software: Tap on
Licenses in the menu of the MarSurf PS 10.
You can request the source code of the open
source software contained in this product from
Mahr GmbH. Please send an email to info@
mahr.com stating the product name and version.
You will then receive the source code on a data
carrier for which Mahr will charge you a fee to
cover the cost of the data carrier, processing and
postage.
The following symbols are used in these
operating instructions:
General information.
i
Caution. Failure to follow instructions
marked with this symbol may cause in-
accurate results and damage equipment.
Warning. Risk of injury or death. Must be
observed!
1