Included In Delivery; Accessories; Installation; Unpacking - Renfert Top spin Manual De Instrucciones

3.3

Included in Delivery

1 Top spin
EN
1 Stepped drill, size: large
1 Instructions for use
1 Allen key
1 Replacement threaded pin
1 Laser sticker set
3.4

Accessories

Item No.
5010 0198
5010 0200
5010 0202 *)
367 0157
367 0159 *)
367 0161
*) Recommended for the Renfert Pin System. The drill sizes small, medium and large are available if the hole size should be
narrower or wider.

4. Installation

4.1

Unpacking

⇒ Take the unit and all the accessories out of the package.
⇒ Check to ensure all delivery parts are complete (compare section 3.3 "Included in Delivery").
4.2

Setting Up

⇒ Place the unit on a level and stable base.
⇒ Decide which working position you require, Fig. 2 (see section 5.4).
4.3

Change laser warning label

⇒ Remove the laser warning label in your language from the sticker set
and stick over the present warning label (13, Fig. 1).
4.4

Electrical Connection

Prior to connection, check that the voltage data on the type plate matches the mains voltage.
⇒ Unroll the power cable and insert the plug into the socket.
Description
Step drill, 3 pcs.
Step drill, 3 pcs.
Step drill, 3 pcs.
Smart-Pin-drill, 3 pcs..
Smart-Pin-drill, 3 pcs.
Smart-Pin-drill, 3 pcs.
Drawing 1
Size Drill Ø
small 1.98 mm
medium 2.00 mm
large 2.02 mm
small 1.57 mm
medium 1.59 mm
large 1.61 mm
Drawing 2
- 6 -
Drawing 1
Drawing 2
Fig. 2