Readying The Unit For Use; Inserting Batteries - Nikon SB-N10 Manual Del Usuario

Readying the Unit for Use

Readying the Unit for Use
Read the manuals for the waterproof case and camera before pro-
ceeding.
The O-Ring
❚❚
The O-ring keeps the unit watertight.
Before using the fl ash, inspect and clean
the ring and O-ring guide and lubricate
the ring as described on pages 34–36.

Inserting Batteries

Inserting Batteries
The unit takes four AA alkaline or nickel-metal hydride (NiMH)
batteries. Use new batteries only; do not combine old and new
batteries or mix batteries of diff erent makes or types.
1 Turn the unit off .
Confi rm that the mode dial is ro-
tated to OFF.
2 Unlatch the battery holder.
Keeping the latch pressed, slide
it counterclockwise to the
latched) position.
A
(un-
Battery holder
O-ring
En
7