Nikon SB-N10 Manual Del Usuario página 84

The Mode Dial
❚❚
Choose a fl ash control mode:
• OFF : Turn the fl ash off .
• M1/M2 : Manual fl ash control (
available with the J1, J2, J3, or S1).
• TTL : TTL fl ash control (
targeting lamp button to enable or
disable fl ash-compensation support.
A Auto Power Off
At settings other than OFF, the fl ash unit will turn off automatically 30 min-
utes after it was last fi red. To turn it on again, rotate the mode dial to OFF
En
and then select the desired mode.
The Flash-Level Dial
❚❚
Use fl ash compensation (TTL mode)
or choose the fl ash level (M1 and M2
modes, not available with the J1, J2, J3,
or S1).
4
0
2 6; not
0
22). Press the