For Your Safety; Intended Use - Flex PE 8-4 80 Manual De Instrucciones

For your safety

WARNING!
Before using the polisher, please read and
follow:
these operating instructions,
–
the "General safety instructions" on the
–
handling of power tools in the enclosed
booklet (leaflet
the currently valid site rules and the
–
regulations for the prevention of
accidents.
This polisher is state-of-the-art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The polisher
may be used only
used as intended,
–
in perfect working order.
–
Faults which impair safety must be repaired
immediately.

Intended use

This polisher is designed
– for commercial use in industry and trade,
– for all types of polishing work with
polishing sponges, lambskins and
woolskins, felt plate, buffing disc
– for use with polishing tools which are
permitted to run at a speed of at least
3900 r.p.m.
14
no.: 315.915),
-
Safety instructions for polishing
WARNING!
Read all safety instructions and other
instructions.
Failure to observe the safety
instructions and other instructions may result
in an electric shock, fire and/or serious
Keep all safety instructions and
injuries.
other instructions in a safe place for the
future.
This electric power tool must be used as

a polisher. Observe all safety information,
instructions, diagrams and data which you
receive with the power tool. If you do not
observe the following instructions, an
electric shock, fire and/or serious injuries
may occur.
This electric power tool is not suitable

for grinding, sanding, for use with wire
brushes or for cut-off grinding. If the
electric power tool is not used as
intended, the user may be exposed
to hazards and may be injured.
Never use accessories which the

manufacturer did not intend or
recommend especially for this electric
power tool. Just because you can attach
the accessory to your electric power tool
does not guarantee safe use.
The permitted speed of the insertion tool

must be at least as high as the maximum
speed indicated on the electric power tool.
An accessory which rotates faster than
permitted may shatter and fly off.
Outer diameter and thickness of the

insertion tool must correspond to the
dimensions of the electric power tool.
Incorrectly measured insertion tools
cannot be adequately shielded or
controlled.
Flanges or other accessories must fit

exactly on the spindle of your electric
power tool. Insertion tools, which do not
fit exactly on the spindle of the electric
power tool, rotate unevenly, vibrate
violently and may result in loss of control.
PE 8-4 80