Grundig Sonoclock 660 PLL Manual Del Usuario página 23

SETTINGS
Note:
If the device is disconnected
7
from the mains, all saved sta-
tions will be deleted unless you
have inserted back-up batteries.
Time settings
Setting the clock time
1 Switch the device to standby with
»ON/OFF«.
2
Press and hold »MEM/TIME« un-
til the hours flash in the display.
&
3 Press » TUNING
hours and press »MEM/TIME« to
confirm.
– Display: the minutes flash.
&
4 TUNING
Press »
minutes and press »MEM/TIME«
to confirm.
– Display: the current time.
Setting the week day
1 Switch the device to standby
mode with »ON/OFF«.
2 Press »SNOOZE« and hold it
down.
3
Set the day of the week with
&
TUNING
»
»SNOOZE« to confirm.
– Display: the current day.
_________________________________________
%
« to set the
%
« to set the
%
« and press
Deactivating and activating
RDS time synchronisation
1
Press »ON/OFF« to switch the
device to standby.
2 Deactivate RDS time synchronisa-
tion by pressing »MEM/TIME«
briefly.
– Display: »CT OFF«.
3 Activate RDS time synchronisa-
tion by pressing »MEM/TIME«
briefly.
– Display: »CT ON«.
– If an RDS time signal can be
received, the time and the day
of the week are updated after
switching on the device.
Setting the alarm times
You can select two different alarm
times. You can choose whether you
want to be woken by the radio or by
an alarm tone.
1
Activate the setting by pressing
1« or
»ALARM
and holding down.
– Display: the last alarm time set,
the hours flash.
2
Set the hours with »
and confirm with
2«.
»ALARM
– Display: the minutes flash.
2«
»ALARM
& %
TUNING
«
1« or
»ALARM
ENGLISH 23