Alarm Mode - Grundig Sonoclock 660 PLL Manual Del Usuario

ALARM MODE

The device has a dynamic alarm
sound, that starts with a low volume
and reaches maximum volume within
a short time.
Viewing the alarm times
1
In standby press »DISPLAY« re-
peatedly.
– Display: in sequence: alarm
time 1, alarm time 2 and the
the time and the day.
Alarm with radio station
1 Press »ON/OFF« to switch on the
device from standby mode.
2
Set the radio station with
+«.
»P
3 Set the desired wake-up volume
with »C«.
4
Activate the radio station as the
alarm sound (»
1« or
»ALARM
peatedly until the display shows:
1
» « or »
§ §
5
Press »ON/OFF« to switch the
device to standby.
– The device wakes you up at the
set time with the radio station
(alarm duration is 90 minutes).
__________________________________
–« or
»P
«) by pressing
§
2« re-
»ALARM
2
«.
Alarm with signal tone
1
Press »ON/OFF« to switch the
device to standby.
2
Activate the alarm signal as the
alarm sound (»
1« or
»ALARM
repeatedly until »
appears in the display.
– The device wakes you up at
the set time with the signal tone
(alarm duration is 90 minutes).
Interrupting the alarm
1
Press »SNOOZE« while the
alarm is going off.
– The alarm signal (radio station
or signal tone) stops.
– The alarm goes off again at five-
minute intervals (overall alarm
duration is 90 minutes).
Cancelling the alarm for
the day
1
Press »ON/OFF« while the alarm
is going off.
– The alarm (radio station or
alarm tone) stops, but it retains
the set time for the next day.
«) by pressing
e
2«
»ALARM
e 1 e 2
« or »
ENGLISH 27
«