CST/BERGER Lasermark 58-MP3 Manual De Instrucciones página 4

FEATURES (Fig. 1)
1. On/Off Switch
The ON/OFF switch turns the power on and off.
Press Once: Projects Plumb Up, Plumb Down, and Level
2. Battery Compartment– Low Battery Indicator
The laser will blink on and off 8 times between 8 second intervals when there is approximately 2
hours of battery life remaining. Average life of the 3 "AA" batteries is 15+ hours of intermittent use.
It is always a good idea to put extra batteries in the carrying case.
3. Tripod Mount– 1/4-20
Easily mounts to 1/4-20 thread tripod for versatility.
4. Magnetic Fastening
Designed with magnets for attachment to steel objects, such as studs. This allows for a secure
hold while taking measurements.
5. Three (3) Self-Leveling Laser Diodes– ±5º
Three laser diodes with warning to let you know that the unit is out of level beyond its 5º
self-leveling capability. If the lasers start blinking quickly, just move laser to a more level position.
ACCESSORIES
3-Beam Self-Leveling Laser Includes: batteries, multi-mount, laser target,
and carrying case.
CALIBRATION
This unit is factory calibrated and should never need calibration. But if it needs to be calibrated, it
must be done by a factory authorized service center.
OPERATIONS
Turn the laser ON and OFF. First time using the laser, install fresh
batteries. Press the ON|OFF button once to power the laser ON. The
laser will project three (3) beams: plumb up, plumb down, and level.
The MP3 has built-in magnets to mount to a metal
surface to help when transferring points.
Out of Level. If the laser is tilted too much and can not self-level (>5º ),
the flashing laser beams will indicate the laser is not plumb. Try to
reposition the laser on a level surface.
Using the Laser to Plumb. To transfer a point from the floor to the
ceiling, center the plumb down beam over the point you wish to
transfer. The laser will project a bright laser beam on the ceiling. Mark
the point as required.
4 • MP3