Intended Use; Safety Advice - BGS technic 8302 Manual De Instrucciones

Timing Tool Set for Mini N12 & PSA Engines
TOOLS
1 Crankshaft locking tool, to be used as
OEM 119590 / 0197-BZ
2 Camshaft locking tool, to be used as
OEM 119540 / 0197-A1 / 0197-A3
3 Chain tensioner, to be used as
OEM 119340 / 0197-M
4 Counterholding tool, to be used as
OEM 119550/552
5 Screw

INTENDED USE

This tool kit contains essential tools that are required when replacing the cylinder head gasket, timing
chain and checking the engine timing on Mini R55 and R56 with engine code N12 and on PSA
engines. The tools allow you to lock and set the crankshaft, camshaft and chain tensioner.
Further information on the item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com

SAFETY ADVICE

•
Do not use the set if any parts are missing or damaged.
•
Only use this tool for the purpose for which it is intended.
•
Never lay tools on the vehicle's battery. This may short the terminals together.
•
Be careful when working on running engines. Loose clothes, tools and other things can be caught
up in revolving parts which may lead to serious injuries.
•
Keep children and other unauthorised persons away from the working area.
•
Do not let children play with the tool or its packaging.
•
Be careful when working on hot engines – risk of burn!
•
Remove the negative battery connection before repairing, so you avoid short circuits and that the
engine will not start unintentionally.
•
This manual is just brief information and will not replace a garage handbook.
•
Always consult specific service literature for information about torques, assemblies and
disassemblies etc.
•
After any successful maintenance and before starting the engine, you should rotate the engine for
two turns manually to check the new control time.
•
Turn the crankshaft in the normal direction (clockwise unless stated otherwise) and only at the
crankshaft itself, never turn the crankshaft by turning camshaft or another wheel.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
2
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
4
2
5
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 8302
2
1
3