Technical Data; Intended Use - Bosch Rexroth LTU350 Manual Del Usuario

10/40 Bosch Rexroth AG | Electric Drives and Controls

1 Technical Data

1 Technical Data
Designation
Order number
Input voltages
Intermediate circuit voltage
Driving voltage
Output voltage
Output frequency
Nominal/peak current
Maximum line length to the motor
Interference suppression
Resistance to jamming
Admissible ambient temperature
Admissible relative humidity when in operation
Admissible storage temperature
Admissible relative storage humidity
Protective class
System of protection
Dimensions (B x H x T)
Weight
Table 1:
Subject to alteration
2

Intended Use

The servo amplifier is intended to be installed
in the BT300 card-rack or in the SB301 and
SB305 system boxes. It supplies and con-
trols the hand-held nutrunner ErgoSpin.
Speed and current regulations take place in
the servo amplifier.
LTU350 | 3 609 929 961/1.1
0 608 750 108
from the supply unit
160 V up to 320 V
DC DC
+ 24 V / – 24 V / 5 V (SELV)
three-phase 0 up to 230 V
0 Hz up to 1000 Hz
dependent on attached motor; max. 12 A / 50 A
100 m
EN 55011 class A (industrial range)
IEC 1000-4 part 2 up to part 5 intensity 4
0 up to 55 °C with ventilator
20 % up to 90 % non-condensing
–20 °C up to 70 °C
20 - 95 %
Protective class I
IP 20 (protection against accidental contact) when
installed
(B x H x T) 46 mm (9 TE) x 271 mm (6 HE) x 285 mm
3.0 kg
AC