Parts And Functions - Uline H-950 Manual De Instrucciones

PARTS AND FUNCTIONS

6
Attached Tank
(Top View)
14
16
12
15
# PART
1 Safety Trigger
2 Gas Handle
3 Gas Valve
4 Igniter
5 Fuel Line
6 Filter
7 Orifice
8 Spark Plug
9 Flame Holder
10 Hose
11 Regulator
12 Adjustment Screw
13 Pressure Gauge
14 Prest-o-Lite Fitting
15 Tank
16 Tank Valve
PAGE 3 OF 27
7
1
11
5
10
13
FUNCTION
Prevents accidental gas release.
Actuates gas valve and igniter.
Opens fuel flow.
Fire piezoelectric spark igniter.
Carries fuel to orifice.
Prevents clogging.
Meters fuel.
Ignites fuel/air mixture.
Prevents flashback and flame out.
Connects regulator and gun.
Regulates pressure to gun.
Sets pressure.
Indicates line pressure.
Connects and contains excess
fuel check valve.
Sold separately, see Tank info
Opens/closes fuel supply.
OPERATING
9
8
3
Side View
CONNECTIONS
1. Connect gun, hose and regulator to the
tank. Use a wrench to tighten fittings (lefthand
threaded). (See Figure 1)
2. Check for leaks.
• Open tank valve without pushing trigger to
pressurize the hose. Pressure gauge should read
15 to 30 PSI when gun is not in use.
• Close tank valve and check pressure gauge.
Rapid pressure loss indicates a leak. Check all
connections.
2
4
Figure 1
0621 IH-950