oneConcept IceCube Manual Del Usuario página 18

EN
18
INSTALLATION
• This Cooler is designed to reduce the temperature up to 1 °C and has a
relaxing cooling effect up to 1.8 m from the front of the unit.
• The cooling effect increases as the relative humidity decreases.
• The dryer the surrounding air, the more cooling you get. The higher the
relative humidity, the less cooling you get.
• It is designed for use in the office, dorm room, bedside, kitchen, or
anywhere you want to cool your indoor personal space.
• The cooler provides natural and efficient cooling, has low power
consumption, no compressor, and does not use any ozone depleting
refrigerant
Filling the water tank
• Before filling the unit with water, unplug the Power Adapter from the wall
and from the unit.
• Always use two hands to carry the unit.
• Place the air cooler Plus in the desired location prior to filling with water.
• The front of the unit should be located within 1.8 m of the desired
personal cooling zone.
• We recommend placing a waterproof pad or cloth under the unit.
1
Remove the water tank out of the
unit.
2
Turn the tank upside down –
remove the tank cap by turning it
counter-clockwise.