Please note:
•
To avoid scratching the upper duct, first adjust its height as desired, using the
measurements given in (Fig. 6) as a reference, and then fix it in place using the
8 screws provided G (Fig. 7).
•
Connect the flexible hose H (not supplied) to the air exhaust hole made previ-
ously and fix the hose to the connector flange F (Fig. 8).
•
Take the ducts out of the packaging (Fig. 9A) and separate the upper duct Y
from the lower duct L.
•
Remove the protective materials from the upper duct Y, as indicated in Fig. 9A.
Take the upper duct Y and fix it to the structure using the 2 screws X (Fig. 9B).
•
•
Join the lower part of the cooker hood L to the upper duct Y until it clicks into
place, then secure it in this position on the lower part of the cooker hood using
the 4 screws A as indicated in Fig. 10.
IMPORTANT - The range hood must be secured to wall studs or use drywall
anchors capable of supporting 35 lbs.
- 16 -