VWR RV 8 Indicationes De Seguridad página 13

3.) Fix the Desktop switching.
4.) Fix the Holding bracket
5.) Insert the bottle and attach the supplied hose connectors to the bottle.
• Attach the switching adapter (K) on the rear side.
Secure it with the Velcro, by contracting both tabs
on the switching adapter. The Velcro must not be
below the switching adapter.
• Connect the Low-voltage connector (M) to the
connection socket (N).
• Plug the power cord (L) in the switching adapter
and connect it to the power source.
• Observe the valid supply voltage.
13