Operating The Device; Using The Device; Turning The Device On - Atlantic Panama A Serie Instrucciones De Instalacion Y De Uso

Radiador dinámico

Tabla de contenido

Idiomas disponibles

Your device is connected to a heating generator such as a heat pump type which, depending on the setting,

will allow you to heat or cool down your house. If your heat pump is set on

operate in Heating mode. If your heat pump is set on the

The heating and cooling needs are provided by the fan built in the unit. Auxiliary heating may be obtained

through the heating front.

For more comfort and energy saving, your device has a control box with digital display. It will allow you to set

all the functions of the device.

When the unit first starts heating, a slight odor may occur. It corresponds to the removal of possible wastes

associated with the manufacture of the unit.

Control box

Switch

An On/Off switch is located on the right side of the device. Use the switch only for a prolonged

shutdown (Powering off the unit for maintenance for example.)

Set the switch on "I" to power the device on.

Heating or cooling mode light indicators

You can view the heat pump operation mode:

Before any use of the control box, it is in the standby mode, which means it is turned off.

For any future use, push any button to turn on the screen.

Make sure the switch is on

To turn the device On, press

and hold on the

for at least 3 seconds.