Important Safety Information; Symbols Used In This Manual; Symbols On The Power Tool; For Your Safety - Flex CS 60 WET Manual De Instrucciones

Contents
Symbols used in this manual . . . . . . . . . 16
Symbols on the power tool . . . . . . . . . . 16
Important safety information . . . . . . . . . 16
Noise and vibration . . . . . . . . . . . . . . . . 19
Overview . . . . . . . . . . . . . . . . . . . . . . . . 20
Technical specifications . . . . . . . . . . . . 21
Operating instructions . . . . . . . . . . . . . . 22
Maintenance and care . . . . . . . . . . . . . . 27
Disposal information . . . . . . . . . . . . . . . 27
Declaration of Conformity . . . . . . . . 28
Declaration of Conformity . . . . . . . . 28
Exemption from liability . . . . . . . . . . . . . 28

Symbols used in this manual

WARNING!
Denotes impending danger.
Non-observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.

Symbols on the power tool

Before switching on the power
tool, read the operating manual!
Wear eye and ear protection!
Disposal information for the old
machine (see page 27)!
16

For your safety

WARNING!
Before using the power tool, please read
and follow:
these operating instructions,
-
the "General safety instructions" on the
-
handling of power tools in the enclosed
booklet (leaflet
the currently valid site rules and the
-
regulations for the prevention of accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged.
The power tool may be operated only if it is
as intended,
-
in perfect working order.
-
Faults which impair safety must be repaired
immediately.

Intended use

The stone separator CS 60 WET designed
- for commercial use in industry and trade,
- for separation work and for cutting
grooves, employing a water supply,
in artificial and natural stone, concrete,
masonry,
- for use with diamond-tipped cutting-off
wheels which FLEX offers for this power
tool and which are authorised to run
at a speed of at least 6200 r.p.m.
It is not permitted to use circular saw blades.
CS 60 WET
no.: 315.915),
-