Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Customer Assistance - Bosch PLR 25 Manual Del Usuario

Accuracy Check of the Measuring Tool
The accuracy of the measuring tool can be checked as follows:
– Select a permanently unchangeable measuring section with
a length of approx. 3 to 10 metres; its length must be pre-
cisely known (e.g. the width of a room or a door opening).
The measuring distance must be indoors; the target surface
for the measurement must be smooth and reflect well.
– Measure the distance 10 times after another.
The measuring error must not amount to more than a maximum
of ±3 mm. Keep a record of the measurements in order to com-
pare the accuracy at a later time.

Maintenance and Service

Maintenance and Cleaning

Store and transport the measuring tool only in the supplied
protective pouch.
Keep the measuring tool clean at all times.
Do not immerse the measuring tool into water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
Maintain the reception lens 17 in particular, with the same care
as required for eye glasses or the lens of a camera.
If the measuring tool should fail despite the care taken in
manufacturing and testing procedures, repair should be car-
ried out by an authorized after-sales service centre for Bosch
power tools. Do not open the measuring tool yourself.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the measuring tool.
In case of repairs, send in the measuring tool packed in its
protective pouch 21.

After-sales Service and Customer Assistance

Our after-sales service responds to your questions concerning
maintenance and repair of your product as well as spare parts.
Exploded views and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer consultants answer your questions concerning
best buy, application and adjustment of products and acces-
sories.
Bosch Power Tools
English | 29
2 609 140 620 | (24.4.09)