Accessories; Parallel Guide; Circle Cutter; Environment - Festool TRION PS 300 Q Manual De Instrucciones

TRION
GB
10

Accessories

The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festool.com".
10.1 Festool guide system FS
The use of the Festool guide system FS (Figure
[7])facilitates the production of straight and precise
cuts, particularly with material thicknesses up to
20 mm. The jigsaw is hereby placed in a guide stop
[7-1] order no. 490031) and guided along the guide
rail in this. The guide stop has two adjustable limit
stops [7-2] for a setting free from play. Use only
crossed saw-blades when utilising the guide stop.
We recommend Festool saw blade S 75/4 FSG.
10.2

Parallel guide

Use the parallel guide (order no. 490119) to guide
the jigsaw parallel to the workpiece edge. The par-
allel guide can be fitted on both sides of the base
runner:
Slide clamping clip [8-1] onto the base runner

from the front,
insert parallel guide [8-2] through the clamping

clip from the side to the desired position,
tighten rotary knob [8-3].

10.3

Circle cutter

The circle cutter (order no. 490118) can be used to
produce circular cuts with a diameter between 120
and 720 mm. The circle cutter can be fitted on both
sides of the base runner:
Slide clamping clip [8-1] onto the base runner

from the front,
insert circle cutter [8-4] through the clamping

clip from the side to the desired position,
tighten rotary knob [8-3],

insert circle tip [8-5] in the rear bore hole of the

circle cutter.
10.4 Festool CMS
By fitting the jigsaws in the Festool Systems CMS
you end up with a semi-stationary bench-mounted
saw for profile cuts. Further information can be
fond in the CMS brochure.
16
10.5 Saw blades, other accessories
In order to saw different materials quickly and
cleanly, Festool offers saw blades for all applica-
tions that are specially designed for your Festool
jigsaw.
11

Environment

Do not dispose of electric power tools in house-
hold waste! Recycle devices, accessories and
packaging. Observe applicable country-specific
regulations.
EU only: In accordance with European Directive on
waste electrical and electronic equipment and im-
plementation in national law, used electric power
tools must be collected separately and handed in
for environmentally friendly recycling.
REACh:
www.festool.com/reach
12

EU Declaration of Conformity

Jigsaw
PS 300 Q
PSB 300 Q
PS 300 EQ
PSB 300 EQ
Year of CE mark: 2000
We declare under sole responsibility that this prod-
uct complies with all the relevant requirements in
the following directives, standards and normative
documents:
2006/42/EG, 2004/108/EG, 2011/65/EU, EN 60745-
1, EN 60745-2-11, EN 55014-1, EN 55014-2, EN
61000-3-2, EN 61000-3-3.
Festool GmbH
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Johannes Steimel
Head of Research, Development and Technical
Documentation
2014-12-04
Serial no.
489580
489584
488639, 494353
489274, 491763