Noise/Vibration Information; English; Battery Charging - Würth Master EWS 10-A Traducción Del Manual Original

OBJ_BUCH-1106-001.book Page 10 Monday, December 21, 2009 3:57 PM
Product Features
While reading the operating instructions, unfold the
graphics page for the machine and leave it open.
The numbering of the product features refers to the
illustration of the power tool on the graphics page.
1 Battery unlocking button
2 Battery
3 Button for charge-control indicator
4 Battery charge-control indicator
5 On/Off switch
6 Thumbwheel for orbit frequency preselection
7 Venting slots
8 Tool holder
9 Sanding plate
10 Clamping bolt with spring washer
11 Allen key
12 Sanding sheet*
13 Adapter for tool holder
14 Saw blade*
*Some accessories shown or described are not part
of the standard delivery scope of the product.
Tool Specifications
Precision Saw
Art. No.
Rated voltage
No-load speed n min
0
Oscillation angle,
left/right
Weight according to
EPTA-Procedure
01/2003

Noise/Vibration Information

Measured sound values determined according to
EN 60745.
Typically the A-weighted noise levels of the product
are: Sound pressure level 84 dB(A); Sound power
level 95 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Sanding: Vibration emission value a
2
uncertainty K=1.5 m/s
Cutting with plunge cut saw blade: Vibration emis-
2
sion value a =13 m/s , uncertainty K=1.5 m/s
h
Cutting with segmential saw blade: Vibration emis-
2
sion value a =12 m/s , uncertainty K=1.5 m/s
h
Scraping: Vibration emission value a
2
uncertainty K=1.5 m/s .
10–English
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
used for different applications, with different acces-
sories or poorly maintained, the vibration emission
may differ. This may significantly increase the expo-
sure level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the
exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as: main-
tain the tool and the accessories, keep the hands
warm, organisation of work patterns.
We declare under our sole responsibility that the
product described under "Technical Data" is in con-
formity with the following standards or standardiza-
tion documents: EN 60745 according to the
provisions
2006/42/EC.
Technical file at:
EMS 10-A
Adolf Würth GmbH & Co.KG, PFW,
0700 282 X
D-74650 Künzelsau
V= 10.8
10.09.2009, Adolf Würth GmbH & Co. KG,
-1
5000–20000
D-74650 Künzelsau
° 1.4
kg 1.0
N. Heckmann
☞
The lithium ion battery can be charged at any time
without reducing its service life. Interrupting the
2
=2.5 m/s ,
charging procedure does not damage the battery.
h
The battery is equipped with a NTC temperature
control which allows charging only within a temper-
2
ature range of between 0 °C and 45 °C. A long bat-
tery service life is achieved in this manner.
2
2
=17.5 m/s ,
h
Declaration of Conformity
of the directives
A. Kräutle

Battery Charging

Note: The battery is supplied partially
charged. To ensure full capacity of the bat-
tery, completely charge the battery in the bat-
tery charger before using your power tool for
the first time.
2004/108/EC,
21.12.09