Introduction - Ingeteam INGECON SUN STORAGE 1Play TL M Manual De Uso Y Configuración

Ingeteam

1 Introduction

This document describes the process to connect and configure INGECON SUN STORAGE
1Play TL M work with BYD B-BOX Premium HVS/HVM.
The ISS 1Play and BYD B-BOX Premium HVS/HVM equipment can be used in the following
type of single-phase installations:
•
Stand-alone installations
•
UPS installations
•
Self consumption installations
The minimum FW versions to work with the ISS 1Play and BYD B-BOX Premium HVS/HVM are
the following:
Minimum Firmware Version used in the ISS 1Play TL M:
•
Inverter: ABH1007_D
Minimum Firmware Version used in the BYD B-BOX Premium HVS/HVM:
•
BMU 3.15
•
BMS 3.22
The battery FW version can be found in "BYD Be Connect" app. It is possible to update the FW
with the same tool. To complete the commissioning, the configuration of the battery via BYD "Be
Connect" app is mandatory.
ABH2010IMC19_
Use and settings of the INGECON SUN STORAGE 1Play TL M working with BYD B-BOX
Premium HVS/HVM
Ingecon Sun Storage 1Play TL M
15