4
Mounting
4.1
Scope of delivery
4.2
Mounting requirements
4.3
Mounting the device
8022570.1A3H / 25.11.2020 | SICK
Subject to change without notice
•
Photoelectric proximity sensor with time-of-flight technology in the version ordered
•
Quickstart
•
Safety notes
•
Typical space requirement for the device, see type-specific dimensional drawing,
see "Dimensional drawings", page
•
Comply with technical data, such as the permitted ambient conditions for opera‐
tion of the device
Figure 2: Sensor alignment
Figure 3: Standard direction
1.
Mount the sensor using a suitable mounting bracket (see the SICK range of
accessories).
2.
Note the sensor's maximum permissible tightening torque of 0.8 Nm.
17.
4
MOUNTING
9