Riester ri-magic Instrucciones Para El Uso página 11

• For normal operation of the light, the bracket (4) and the universal clamp (1) and/
or the tripod bracket (17) will heat up around the socket (8,a,b).
6. Instruction for care
General information
The goal of cleaning and disinfection of medical products is the protection of pati-
ents, users and third persons and conserving the value of the medical products. On
account of the product design and the used material, no defined limit of maximum
processing cycles can be fixed. The lifetime of the medical products depends on their
function and on a appropriate treatment of the devices. Before returning faulty pro-
ducts for repair they must have gone through the described reprocessing process.
Cleaning and disinfection
The ri-magic
HPLED
®
until optical cleanness is given. Wipe disinfection according to the regulations given
by the disinfectant manufacturer. Only disinfectants with approved efficiency and in
accordance with the national standards can be used. Means for cleaning or disin-
fection may be a soft, possibly lint-free cloth or Q-tips. After disinfection the device
must be cleaned with a humid cloth to remove all possible deposits of disinfectants.
Caution!
Prior to cleaning or disinfection of the light, disconnect plug from mains socket! The
items are not permitted for machine cleaning and sterilisation as they will damaged!
7. Specification
Model:
Input:
Output:
Type of lamp:
Classification:
Working temperature:
Storage place:
Weight:
8. Maintenance
The instruments and their accessories require no special maintenance. If an instru-
ment needs to be inspected for any reason, please send it to us or to an authorised
Riester dealer in your area, whom we will gladly name upon request.
9. Standards
Photobiological safety of lamps and lamp systems DIN EN 62471 IEC 60601-1
10. Disposal of the packaging
When disposing of the packaging material, pay attention to the appropriate waste
regulations. Keep out of reach of children.
Risk of explosion
Do not use this device in the presence of flammable anesthetic gases, vapors or
liquids.
Disposal of accessories and device
Disposable accessory is intended for a single use. It should not be reused for its
function may be impaired or contaminated. The service life of this ri-magic HPLED
is 10 years. At the end of the service life, the ri-magic HPLED and all accessories
must be disposed of in accordance with the regulations of such products. If you have
questions regarding disposal of the product, please contact the manufacturer.
11. ELECTROMAGNETIC COMPATIBILITY
ACCOMPANYING DOCUMENTS ACCORDING TO
IEC 60601-1-2, 2014, Ed. 4.0
Attention:
Medical electrical equipment is subject to special precautions regarding electroma-
gnetic compatibility (EMC).
Portable and mobile radio frequency communication devices can affect medical
electrical equipment.
The ME device is for operation in an electromagnetic environment for home health
care and intended for professional facilities such as industrial areas and hospitals.
The user of the device should ensure that it is operated within such an environment.
examination light can be cleaned outside with a humid cloth
examination lamp
Table lamp / wall lamp / floor lamp
100 V - 240 V / 50 - 60 Hz / 0.6 A
5 V 3 A 15 W
LED
Type B
0° to +40° C, relative humidity between 30 and 75 %
(non-condensing)
-5 ° to +50 ° C, up to 85 % relative humidity
(non-condensing)
Table and wall model:
Stand model:
ri-magic HPLED
®
approx. 2.5 kg
approx. 7.5 kg
11