Power Save Mode; Colorguard System - Hatco Toast Qwik TQ-10 Serie Instrucciones Originales

OPERATION

Power Save Mode

All TQ-400, -800, and -1800 series toasters have a built-in
Power Save mode with an indicator light feature. This feature
allows the toaster to go into stand-by mode and reduces power
to the heating elements by 50 percent. During Power Save
mode the Power Save button will illuminate.
To activate Power Save mode:
1. Press the Power Save button (
will illuminate.
To deactivate Power Save mode:
1. Press the Power Save button (
Power Save button will no longer illuminate.
NOTE: Allow a minimum of 2–3 minutes before toasting. Unit
is back up to full power within 10 minutes.

ColorGuard System

All TQ-400, -800, and -1800 series toasters use a patented
ColorGuard sensing system that monitors and automatically
adjust conveyor speed during high usage periods to assure
toast color uniformity.
NOTE: The ColorGuard sensing system is inoperable for
approximately ten minutes after any heat adjustments
are made.
). The Power Save button
) or turn any knob. The
14
Adjusting the Toast Feed Ramp
The toast feed ramp is installed at the factory and can be used
in two positions.
Automatic Feed Position
For automatic feed, the toast feed ramp should be in an upright
position. Bread products enter the toaster by placing them on
the feed ramp and releasing.
Manual Feed Position
For manual feed, the toast feed ramp should be in a horizontal
position on top of the toaster. Bread products are manually
loaded by placing directly on the conveyor belt.
Automatic Feed
Position
Toast Feed Ramp
Manual Feed
Position
Form No. TQ2CEM1-1120