Detailed View; Led Indication; Raid Switch - SilverStone DS321 Manual De Instrucciones

1. Introduction

1.5 Detailed View

Front View

1.5.1 LED indication

LED Status
• Blue = Power on
• Green = Status OK, USB connection to computer is established
• OFF = Empty drive bay or USB connection is not yet established
HDD
• Flashing Green = Data access (read/write)
A & B
• Blinking slow (500ms on/off) = Drive failure (error)
• Blinking fast (125ms on/off) = Rebuilding RAID 1 array
Note
In order to determine which type of blinking the LED indicates, stop transferring files to or from the hard drives.
The slow blinking will be slower and the fast blinking will be faster than the usual flashing of the LED during
data access.

1.5.2 RAID switch

DIP Switch RAID Mode
Non-RAID
Switch position: 1 OFF, 2 OFF
RAID 0 - Striping
Switch position: 1 ON, 2 OFF
RAID 1 - Mirroring
Switch position: 1 OFF, 2 ON
Note
Except for the Non-RAID mode, two hard drives are required.
After changing the RAID mode, press the button above the RAID switch to confirm the new setting.
Rear View
Changing the RAID mode requires formatting the drives.
Make sure to backup all existing data first!
Fan
Confirm RAID mode
RAID switch
Kensington lock
USB port
Power switch
Power receptacle
ENGLISH
4