Cleaning
• Always unplug the appliance before you
start cleaning the motor unit.
53
• You can clean the motor unit with a damp
cloth. Do not immerse the motor unit in
water and do not rinse it either.
• Always clean the parts that have come into
contact with food in hot water with
washing-up liquid immediately after use.
1
• Clean the blade, the knife unit of the
2
blender and the slicing disc very carefully.
54
The cutting edges are very sharp!
3
• Make sure that the cutting edges of the
blade and the slicing disc do not come into
contact with hard objects: this could cause
them to become blunt.
• The gearwheels of the beater can be
detached and cleaned very easily
(fig. 53-54).
• Certain ingredients may cause
55
discolorations on the surface of the
accessories. This does not have a negative
effect; the discolorations usually disappear
after some time.
• Wrap the (excess) mains cord around the
reel on the back of the appliance (fig. 55).
12