- Put the cone (AA) in place (fig. 31) and
press it home lightly.
- Turn on the food processor and set the
speed control to position 3 (fig. 32).
31
- Press one half of a citrus fruit firmly onto
the rotating cone (fig. 33).
• Stop pressing from time to time to remove
pulp from the sieve. When you do so,
switch off the appliance and remove the
M
bowl along with the sieve and the cone.
After use
32
- Remove the bowl along with the citrus
M
press accessories to prevent juice from
leaking onto the appliance.
- Remove the pulp from the cone and the
sieve.
- Rinse the bowl, cone and sieve
immediately after use. You can then wash
them in hot water with washing-up liquid or
put them in the dishwasher. Do not use any
33
abrasives, scouring pads, etc.
• Certain ingredients may cause
discolorations on the surface of the
accessories. This does not have a negative
effect; the discolorations usually disappear
after some time.
34
35
9
Juice extractor, general description
4
Juice extractor accessories
AC
AE
Filter
Pusher
AD
AF
Pulp sieve
Lid
The juice extractor accessories can only
be used with the Philips HR 7727 food
processor.
Assembly
- Put the bowl on the motor unit (fig. 2).
- Put the filter (AC) in the pulp sieve (AD)
(fig. 34).
- Put the pulp sieve in the right position
(fig. 35).