Pump Nomenclature • General Information
ORDERING REPLACEMENT PARTS:
Locate the Berkeley nameplate on the pump, plate
is normally on the bearing bracket. Information found
on this plate is shown below. To be sure of receiving
correct parts, provide all nameplate data when ordering.
The BM (Bill of Material) number is most important.
Write your nameplate information on the blank
nameplate below for future reference as nameplates can
become worn or lost.
Modelo/Model
Record nameplate data here.
SAMPLE ONLY
Dia del impulsor/Impeller Dia.
Illustration on the following page show typical
components used in the assembly of bearing frame
mounted centrifugal pumps. Refer to this drawing when
ordering any replacement parts.
Serie/S.N.
Fecha/Date
24
6808 0413