Ibanez Troubadour 20 Manual Del Usuario página 8

Troubleshooting
1. The power supply cannot be switched ON.
• Check that the power cable has been connected correctly.
• Try plugging it into a different power supply socket and see if the same problem occurs.
2. The power supply can be turned ON, but no sound is produced.
• Check that the guitar has been connected correctly.
• Remove the effects between the guitar and the amplifier and check to see if no sound is produced.
• Replace the shielded cable and check to see if no sound is produced.
• Check to see if the volume on the guitar is set to "0".
• Check to see if there are batteries in the guitar. If there are, check that they are OK.
• Use a different guitar and see if no sound is produced.
• Check to see if the volume on the amp is set to "0".
3. Noise occurs
• Check to see if anything in the immediate vicinity is resonating or banging against the amplifier to produce the noise.
• Check to see if the plug cover on the shielded cable is loose.
• Check that the string action (distance between strings and frets) is correctly adjusted (not too low).
• Check to see if the guitar batteries are depleted.
• Use another guitar, effects and cable to see if the same noise is produced.
In the case of defects
This product has passed exhaustive inspections before being shipped from the factory. Ensure that the above procedures are carried out when a problem is thought to exist.
Contact your dealer in the unlikely event that an abnormality occurs during use. Also, ensure that the symptoms of the problem are explained in detail when requesting repairs
in order to facilitate swift handling.
8