Toshiba dynadock U3.0 Guía De Usuario página 25

Setting Up the dynadock™ and Connecting Peripherals
To connect a USB device to the dynadock™:
1
If your device came with its own AC adaptor, connect the AC
adaptor to the device and to a live electrical outlet.
2 Use a USB cable to connect the device to one of the USB ports
on the dynadock™.
3
Wait for Windows
drivers. A message should display on your computer screen
indicating when installation is complete and the device is ready
to use.
NOTE
If you want to charge your USB device when the computer connected
to the dynadock™ is off or when there is no computer connected to
the dynadock™, be sure to connect your device to the powered USB
port on the front of the dynadock™.For more information, see
"Charging USB devices using Toshiba USB Sleep and Charge"
(page
®
to recognize the device and install the
34).
25