Supported Display Modes - Toshiba dynadock U3.0 Guía De Usuario

2 Select Extend or Mirror from the menu.
NOTE
NOTE
NOTE
NOTE

Supported display modes

Two components make up the display mode: Resolution and
Refresh rate. These components are defined as follows:
❖
Resolution: The number of pixels displayed on the screen
horizontally and vertically.
❖
Refresh rate: The speed at which the entire screen is
re-scanned. Higher frequencies reduce flicker.
Using the dynadock™ and Adjusting Settings
If the icon is not visible in your system tray/notification area, make
sure the dynadock™ is connected and docked, and then click the
Show Hidden Icons button (
icons.
If you notice certain windows or other parts of your display are
missing when you disconnect your computer from the dynadock™,
you may need to de-select the Extend desktop onto this display
checkbox in your Windows
image to your primary screen.
You can also use the Windows
Extended mode and Mirror mode.
The external displays connected to the dynadock™ may be identified
as "2", "3", or "4" on the Windows
your computer model), even though there may not be four viewable
displays.
), if necessary, to display hidden
®
Display settings to return the entire
®
Display settings to switch between
®
Display settings (depending on
29