Charging Usb Devices Using Toshiba Usb Sleep And Charge - Toshiba dynadock U3.0 Guía De Usuario

34
Using the dynadock™ and Adjusting Settings
NOTE
2 Select Audio Setup from the menu.
3 On the Recording tab of the dialog box, select one of the
following:
❖
❖
4 Click Set Default.
5 Click OK.
NOTE

Charging USB devices using Toshiba USB Sleep and Charge

Your dynadock can supply USB bus power (DC 5V) and can charge
select USB devices (such as MP3 players and mobile phones) using
the dynadock's front USB ports ("USB Sleep and Charge" ports)
even when your computer is undocked or disconnected from the
dynadock™, or your computer is off.
NOTE
This function can only be used for the ports that support the "USB
Sleep and Charge" function (hereinafter called "compatible port").
NOTE
If the icon is not visible in your system tray/notification area, make
sure the dynadock™ is connected and docked, and then click the
Show Hidden Icons button (
icons.
To use the dynadock's microphone in jack, select
dynadock Audio device.
To use the docked computer's microphone in jack, select
the appropriate recording device (other than dynadock
Audio device).
You may need to restart your media player for the audio changes to
take effect.
The "USB Sleep and Charge" function may not work with certain
external USB devices. Please contact the USB device manufacturer
or check the specifications of the external USB devices for further
details.
Compatible USB ports have the (
), if necessary, to display hidden
) symbol icon.