Networking The Pdu - Tripp-Lite PDUMH15AT El Manual Del Propietario

2. Installation
2.2.4 Selecting Input Voltage Range (optional: Models PDUMH15HVAT,
PDUMH15HVATNET, PDUMH20HVAT and PDUMNH20HVATNET only):
These models have two selectable nominal input voltage ranges: 200V-208V ("LO") and
220V-240V ("HI"). Press the button next to the display to toggle the nominal voltage setting to the
desired "HI" or "LO" range. This setting adjusts the voltage ranges for the primary and secondary
inputs. The display will indicate "HI" or "LO" for five seconds.
2.2.5 Connect Equipment to PDU:
Do not exceed the load rating of the PDU. The total electrical current used by the PDU will be
displayed on the digital meter in amperes. Each outlet includes a green LED that illuminates when
the outlet is receiving AC power.
2.2.5

2.3 Networking the PDU

For network configuration instructions, please refer to the WEBCARDLX Owner's Manual
included with this product.
19-04-221-933721.indb 6
PDUMH20AT
PDUMH15AT
RESET
STATUS CONFIG
PDUMH20ATNET PDUMH20HVAT, PDUMH20HVATNET
STATUS CONFIG RESET
PDUMH15ATNET
PDUMH15HVAT, PDUMH15HVATNET
6
Secondary Input Primary Input
9
6/10/2019 1:40:43 PM