Cleaning & Maintenance - Boneco U200 Manual De Instrucciones

Ocultar thumbs Ver también para U200:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 65
Operation
A) On-off switch and regulation of mist
output
Turning the rotary switch clockwise switches the appliance
on and at the same time regulates the mist output from
low to high.
B) Water level indicator
The water level indicator clearly shows how much water is
in the appliance. The appliance switches off automatically
when the water tank is empty. The water level indicator illu-
minates red. For further information please read the section
«Filling the tank». After inserting the full tank, it may take a
few seconds until the red light goes out.
C) Switching blue illumination on/off
The blue illumination can be switched on and off with the
sliding switch on the backside of the main body. The red
illumination cannot be switched off.
Cleaning / Maintenance
Always switch the appliance off before removing
the water tank. Do not reach inside the nebulizer
space while the appliance is running!
Only use CalcOff for decalcification and cleaning
of the product. Damage that is caused by the
use of other cleaning agents is not covered by
the warranty.
Caution: water must not be allowed to enter the
ventilation opening! This will damage the appliance
(22).
• Switch the appliance off and unplug the adapter from
the appliance (23).
• Remove the fragrance container by pressing it
briefly (24).
• Clean the water tank and the nebulizer space regularly
once a week (25/30).
• Decalcify the nebulizer space regularly with
CalcOff (26). Rinse out the decalcification agent
thoroughly with plenty of water. When doing so,
ensure that no water enters the ventilation opening.
• Removing the mist outlet (27): use either the
brush or a spoon to lift the mist outlet through the
opening to remove it.
22
23
24
en
23

Publicidad

Tabla de contenido
loading

Tabla de contenido