Intended Use; Possible Misuse; Lithium­ion Battery Status Display; Items Supplied - Hilti WSR 36-A Manual De Instrucciones

Ocultar thumbs Ver también para WSR 36-A:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 55
Contact shoe adjustment button
$
Contact shoe
£

3.2 Intended use

The product described is a cordless reciprocating saw. It is designed for cutting wood, wood-like materials,
metals and plastics.
The product is designed for two-handed operation.
▶ Use only Hilti Li-ion batteries from the B 36 series with this product.
▶ Use only the Hilti battery chargers from the C4/36 series for these batteries.

3.3 Possible misuse

▶ Do not use the power tool to cut bricks, concrete, cellular concrete, natural stone or tiles.
▶ Do not use the product to cut pipes that still contain liquids.
▶ Do not saw into unknown materials.
3.4 Lithium­ion battery status display
The charge state of the Li-ion battery and malfunctions of the power tool are indicated by the display on
the Li­ion battery. The charge state of the Li­ion battery is displayed after pressing one of the two battery
release buttons.
Status
4 LEDs light up.
3 LEDs light up.
2 LEDs light up.
1 LED lights.
1 LED blinks.
1 LED blinks, the power tool is not ready for use.
4 LEDs blink, the power tool is not ready for use.
Note
Battery charge state cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch. If the battery display LEDs blink, please observe the instructions
given in the Troubleshooting section.

3.5 Items supplied

Reciprocating saw, saw blade, operating instructions.
Note
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Center or online at: www.hilti.com

3.6 Stroke rate setting

Material to be cut
Wood
Wood containing nails
Interior finishing, drywall
Plastic
Steel
Non-ferrous metals
Aluminium
Stainless steel
Saw blade
|
Meaning
Charge state: 75 % to 100 %
Charge state: 50 % to 75 %
Charge state: 25 % to 50 %
Charge state: 10 % to 25 %
Charge state: < 10 %
The battery has overheated or is completely
discharged.
The power tool is overloaded or has overheated.
Suggested stroke rate settings
5-6
5-6
3-4
3-4
2-3
2-3
2-3
1
17

Publicidad

Tabla de contenido
loading

Tabla de contenido