Technical Data; Reciprocating Saw - Hilti WSR 36-A Manual De Instrucciones

4 Technical data

4.1 Reciprocating saw

Rated voltage
Weight in accordance with EPTA procedure 01/2003
Stroke rate
Stroke
Keyless chuck for standard accessory tools
4.2 Noise information and vibration values determined in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance
with a standardized test and may be used to compare one electric tool with another. They may be used
for a preliminary assessment of exposure. The data given represents the main applications of the electric
tool. However, if the electric tool is used for different applications, with different accessory tools, or is poorly
maintained, the data may vary. This may significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually in use for a task. This may significantly reduce exposure over the
total working period. Identify additional safety measures to protect the operator from the effects of noise
and/or vibration, for example: maintain the tool and the accessories, keep the hands warm, organization of
work patterns.
Noise emission values determined in accordance with EN 60745-2-11
Sound (power) level (L
Uncertainty for the sound power level (K
Sound pressure level (L
Uncertainty for the sound pressure level (K
Total vibration (vector sum of three directions), measured in accordance with EN 60745-2-11
Vibration emission value for sawing chipboard (a
Vibration emission value for sawing wood beams
(a )
h,WB
Uncertainty (K)
5 Operation
5.1 Safe operation 2
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Remove the battery before making any adjustments to the power tool or before changing
accessories.
WARNING
Risk of injury! Danger of kickback.
▶ Always use saw blades of adequate length. The tip of the blade must project at least 40 mm (1¹/₂")
beyond the reverse side of the workpiece during the blade stroke.
18
)
WA
)
WA
)
pA
pA
WSR 36­A
36 V
4.37 kg
0 rpm ... 2,850 rpm
32 mm
1/2 in
WSR 36­A
101 dB(A)
3 dB(A)
90 dB(A)
) 3 dB(A)
WSR 36­A
) 13 m/s²
h,B
16 m/s²
1.5 m/s²