Cub Cadet H20 Instrucciones De Funcionamiento Originales página 13

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 108
Safety information
Before use
Before you begin work, make sure that you
are familiar with the device, its controls and
how to operate it.
the device is operated safely.
Only operate the device in a technically fault-
less state.
Never use a device with damaged or missing
guards.
Never use the device with defective or dam-
aged safety equipment.
Check (by means of visual inspection) wheth-
blunt, damaged or deformed.
Connect trailers or attachment devices care-
fully.
Check that all start locks and pushbuttons/
control switches are working properly.
centre.
Safety information
Tips for use
Do not mow lawns which have grass blades
longer than 25 cm.
Drive carefully.
Pay particular attention when you are mowing
or driving in reverse.
Adjust the cutting height only when the de-
vice and the cutting tool are at a standstill.
al mulch locking part or the optional grass
catcher while the device is turned on.
Never drive over gravel or footpaths with the
cutters running.
Do not mow over overgrown, dry grass (e.g.
pasture grass) or over dry heaps of leaves.
Do not park the device on dry grass or leaves.
or when crossing a road.
Never empty the grass catcher while the cut-
ter deck is running.
Take extra care with opening and closing the
grass catcher; there is a risk of crushing.
When mowing close to lawn edges (e.g. close
to particularly steep slopes, pits, or under
trees, and by bushes and hedges), maintain a
safe distance at all times.
Never stand in front of the grass discharge
openings.
key before removing blockages or releasing
obstructions in the discharge channel.
Never remove the safety key without having
Never press the start/stop button while the
device is moving.
Always drive carefully so as not to lose con-
trol of the device, as this could lead to serious
injuries or fatality.
Do not use the device with wet hands.
Avoid body contact with earthed cables, such
as metal pipes or wired fences, during opera-
tion to reduce the risk of an electric shock.
EN
-
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

769-21272a

Tabla de contenido