MAINTENANCE SCHEDULE
Action
Inspect the tightness of the
screws and nuts
Check fuel line leak tightness
Saw chain lubrication
Check air filter cleaning
Clean the air filter
Check
Clean the fuel filter
Replace the fuel filter
Clean the spark plug and readjust
the gap between the electrodes
Replace spark plug every 100
hours of use
Clean the primer bulb
Clean the fuel tank
Check idle speed
Check/adjust valve clearance
Check the clearance in the
impeller
Check oil inspection window
Check fuel line
Check combustion chamber
(1) Perform frequent maintenance works when the equipment is used in dusty areas.
(2) These items should be serviced by the service dealer unless you have the appropriate tools and mechanical
knowledge.
44
1st month
or
20 hours
or 50 hours
(1)
Every 2 years (replace if necessary) (2)
Every 3
Every 6 months
months
or 100 hours
After 500 hours (2)
Every year or
300 hours
(2)
(2)
(2)