Other Functions; Adjusting The Sound Characteristics; Adjusting The Equalizer Curve; Eq7 Tune - Sony MEX-R1 Manual De Instrucciones

Other functions

Adjusting the sound
characteristics
You can adjust the bass, treble, balance, fader
and subwoofer volume.
OFF
SRC
SOUND
SOUND
SETUP
SYSTEM
MENU
Z × Z
AUDIO SUBTITLE
1
Select a source, then press (SOUND)
repeatedly to select the desired item.
The item changes as follows:
BAS (bass) t TRE (treble) t
BAL (left-right) t FAD (front-rear) t
SUB (subwoofer volume)*
* " ∞" is displayed at the lowest setting, and can be
adjusted up to 20 steps.
2
Press </, repeatedly to adjust the
selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
With the main unit
In step 2, to adjust the selected item, press the volume
+/– button.
34
ATT DVD
MODE
+
TOP MENU MENU
ENTER
–
LIST
</,
PICTURE
EQ DSO EQ7
ANGLE

Adjusting the equalizer curve

— EQ7 Tune

You can adjust and store the equalizer settings
for different tone ranges.
OFF
SRC MODE
TOP MENU
SOUND
ENTER
SETUP
SYSTEM LIST
SYSTEM
MENU
MENU
PICTURE
Z × Z
EQ
AUDIO SUBTITLE
1
Select a source, then press
(SYSTEM MENU).
2
Press M/m repeatedly until "EQ7
TUNE" appears, then press (ENTER).
3
Press </, repeatedly to select the
desired equalizer type, then press
(ENTER).
4
Press </, repeatedly to select the
desired frequency.
The frequency changes as follows:
62Hz y 157Hz y 396Hz y 1kHz y
2.5kHz y 6.3kHz y 16kHz
5
Press M/m repeatedly to adjust the
desired volume level.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 4 and 5 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold (ENTER).
6
Press (ENTER).
The setting is complete and the display
returns to normal play/reception mode.
ATT DVD
+
MENU
M/m
ENTER
–
</,
DSO EQ7
ANGLE