Publicidad
Step 25
NOTE: Before inserting a drawer, be sure the INNER CARTRIDGE in the EXTENSION RAIL on your unit is all the way
å
forward. The INNER CARTRIDGE should click into place against the BLACK TAB.
To insert the large drawer into your unit, line up the EXTENSION SLIDES on the drawer with the EXTENSION RAILS on the
å
unit and push the drawer into the unit until the drawer is fully inserted. The drawer will push in hard until it is all the way in,
then it will slide in and out easier. Repeat this step for the KEYBOARD SHELF (Q).
To insert the small drawer into your unit, tip the front of the drawer down and drop the rollers on the drawer behind the
å
rollers on the unit. Lift the front of the drawer up and slide it into the unit.
To make adjustments to the drawers, loosen the SCREWS in the DRAWER FRONT BRACKETS, make needed
å
adjustments, and tighten the SCREWS.
Click the inner cartridge into place against the black tab.
Front
Black tab
Page 30
Inner cartridge
Extension Rail
Q
404944
www.sauder.com/services
Publicidad
