Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (MM) into the large holes in the RIGHT END (A)
and LEFT END (B).
Repeat this step for the UPRIGHTS (C and D), both
å
BOTTOMS (F), and MODESTY PANEL (G).
(18 used)
Page 6
Do not tighten the TWIST-LOCK® FASTENERS in this step.
MM
A
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
B
404944
www.sauder.com/services
Publicidad
