Adjusting The Vent - THERMEx AIRSLIM Instrucciones De Montaje

48
THERMEX AIRSLIM

ADJUSTING THE VENT

The motorised vent can be adjusted so that it's completely closed or in basic ventilation mode when the extractor hood is switched off. The vent can
also be adjusted to forced operation or to fully open when the extractor hood is switched on. The adjustment must always be performed in accordance
with the regulations of the manufacturer of the ventilation system.
The adjustment must be performed as follows:
1
Use a pointed object to gently turn the stop
blocks to basic ventilation and forced operation
of the vent motor.
NOTE: Be careful not to damage the vent mo-
tor and stop blocks.
The dimensioning diagram can be found in the DIMENSIONING DIAGRAMS
1
2
1. Stop for forced operation
2. Stop for basic ventilation
3. Vent motor
3
2
Find the correct position for the stop pads by
measuring the air velocity over the vent.
section.
M 530991001205122017
3
Mount the stop blocks onto the vent motor
again.