Pre Delivery Checklist - Textron JACOBSEN InCommand Eclipse 2 118 Manual Del Distribuidor

12

PRE DELIVERY CHECKLIST

12.1 PRE-DELIVERY CHECKLIST_________________________________________________
Product No. _____________
Mower
Check:
o
Brake adjustment
o
Handle bar angle & spring adjustment
o
Transport wheel installation & retaining clip function
o
Operation of kickstand
o
All decals in place and legible
o
OPC
o
Belt Adjustments
Electrical System
o
Iginition switch working correctly
o
Reel Switch working correctly
o
Controller and LCD Display Functioning Correctly
o
Reel and Traction Motors operating correctly
o
No pinched or rubbing wires
Gas Engine Power Modules
Check:
o
Engine oil level
o
Air cleaner element and connections
o
Gas Engine Generator output at 59.9 Volts
Should you encounter any areas that required repair during set-up, please explain below and fax a copy of the checklist and
704-504-4827
problem description to us (
Problem Description ______________________________________________________________________________________
________________________________________________________________________________________________________
________________________________________________________________________________________________________
________________________________________________________________________________________________________
Distributor _________________________________________
Customer _________________________________________
Battery Power Modules
Check:
o
o
Cutting Units
Check:
o
o
o
Adjust the following:
o
o
o
Miscellaneous
Check:
o
o
o
o
o
).
Inspected __________________________________________
Date ______________________________________________
PRE DELIVERY CHECKLIST
Serial No.
____________________
Batteries properly installed and connected
Batteries Fully Charged
Bedknife screws tight
Reel - should be no free end play
All hardware properly tightened
Reel to bedknife, .001" to .003" (.025 - .08 mm) clearance.
Bedknife backing adjuster spring tension
Adjust cutting height to customers' requirements
For loose or missing hardware
All lubrication points
Paint finish; touch up where necessary
Decals in place and legible
All customer ordered accessories installed
12
43