Hazard Levels - Kärcher RC 3 Manual De Instrucciones

jects on tables or smaller
pieces of furniture).
 The cleaning robot may get
stuck in telephone cables,
electrical cables, tablecloths,
strings, belts, etc., which can
lead to the dropping of ob-
jects.

Hazard levels

DANGER
Pointer to immediate danger,
which leads to severe injuries or
death.
WARNING
Pointer to a possibly dangerous
situation, which can lead to se-
vere injuries or death.
CAUTION
Pointer to a possibly dangerous
situation, which can lead to mi-
nor injuries.
ATTENTION
Pointer to a possibly dangerous
situation, which can lead to
property damage.
Charger
Use the following adaptor:
NLD100180W1U4
Charger
WARNING
Charge the battery with the en-
closed original charger or a
charger approved by KÄRCHER
only.
Do not throw the battery into the fire.
Do not throw the battery into the water.
16
Machine operator information:
WARNING
CLASS 1 LASER PRODUCT
Due to lack of space, this label could not longer be at-
tached to the product.
EU Declaration of Conformity
Device
RC 3
Alfred Kärcher SE & Co. KG hereby declares that the ra-
dio device type Robo Cleaner complies with the 2014/
53/EU directive. The full text of the EU Declaration of
Conformity can be found at www.kaercher.com/rc3.
Description of the Appliance
Illustrations on fold-out page!
1 Station
2 Mains plug connection
3 Lower part of station
4 Battery contacts
5 Dirt receptacle
6 Blower
7 Power switch
8 Floor sensors
9 Side brush
10 Battery contacts
11 Front wheel
12 Battery/battery compartment
13 Rubber brush
14 Brush roller
15 Laser sensor
16 Display
17 AUTO button (with indicator light)
18 Power supply unit
Function and Mode of Operation
The appliance consists two units: a station and a bat-
tery-operated cleaning robot.
The mobile cleaning robot obtains its energy from a
built-in rechargeable battery. The cleaning robot can
clean for up to 120 minutes with a single battery charge.
The robot independently returns to the station for re-
charging when the battery charge is low enough. It
switches the cleaning unit off during a longer station
search to save energy while searching.
The cleaning robot moves systematically. It scans the
room with a camera-laser sensor and then cleans the
room gradually. It navigates around obstacles.
The flat design of the cleaning robot allows it to also
clean the floor underneath pieces of furniture, such as
beds, sofas, cupboards, and wardrobes.
The cleaning robot has reliable fall sensors to detect
staircases and steps and prevent it from falling.
EN – 8
Type Frequen-
cy
MHz
WLAN 2412-
2472
Cleaning robot
Power
max. ERP
60 mW