Replacing The Silencer - Festool LRS 400 Manual De Instrucciones Original/Lista De Piezas De Repuesto

All maintenance and repair work which
requires the motor casing to be opened
may only be carried out by an authorised
service centre.
6.1 Vanes
We recommend that the vanes on the motor be
replaced after approx. 500 operating hours.
6.2 Lubrication
If the machine is not used for longer periods, e.g.
for a weekend, introduce 1 or 2 drops of lubricat-
ing oil into the compressed-air supply [2-1] on the
machine prior to use.
6.3

Replacing the silencer

The silencer on the IAS 2 connecting piece must
be replaced at regular intervals to maintain the
power of the pneumatic tool.
7 Accessories, tools
Use only original Festool accessories and Festool
consumable material intended for this machine
because these components are designed specifi -
cally for the machine. Using accessories and con-
sumable material from other suppliers will most
likely affect the quality of your working results and
limit any warranty claims. Machine wear or your
own personal workload may increase depending on
the application. Protect yourself and your machine,
and preserve your warranty claims by always using
original Festool accessories and Festool consum-
able material!
The order numbers of the accessories and tools
can be found in the Festool catalogue or on the
Internet under "www.festool.com".
8 Disposal
Do not throw the tool in your household waste!
Dispose of machines, accessories and packaging
at an environmentally responsible recycling cen-
tre. Observe the valid national regulations.
9 Warranty
For our tools, we give warranty for material and
production defects in accordance with the locally
applicable legal provisions, but in any case for at
least 12 months. Within the EU member states,
the warranty period is 24 months (verifi cation
through invoice or delivery note). Damage caused
by, in particular, natural wear, overloading, incor-
rect handling, or damage caused by the operator,
or damage caused through use of the equipment
contrary that specifi ed in the operating manual, or
damage which was known at the time of purchase,
is not covered by the warranty. Furthermore, dam-
age caused by the use of non-original accessories
and consumable materials (e.g. sanding pads) is
also excluded. Complaints can only be recognised
if the tool is returned while still assembled to
the supplier or an authorised Festool Customer
Service workshop. Keep the operating manual,
safety instructions, spare parts list and purchase
receipt in a safe place. Otherwise the respective,
current warranty conditions of the manufacturer
shall apply.
Note
We reserve the right to make changes to the tech-
nical data contained in this information as a result
of ongoing research and development work.
14