Siemens sitrans LR260 (HART) Manual De Inicio Rápido página 19

Quick Start Wizard via SIMATIC PDM
Notes:
• The Quick Start wizard settings are inter-related and changes apply only after you click
on Transfer at the end of step 4.
• Do not use the Quick Start Wizard to modify individual parameters. (Perform
customization only after the Quick Start has been completed.)
• Initial Quick Start parameter values are not default values and do not necessarily reflect
the current device configuration.
• Click on BACK to return and revise setting or Cancel to exit the Quick Start.
Launch SIMATIC PDM, open the menu Device – Quick Start, and follow steps 1 to 4.
Maintenance
SITRANS LR260 requires no maintenance or cleaning under normal operating conditions. If
cleaning becomes necessary under severe operating conditions:
1. Note the antenna material and the process medium, and select a cleaning solution that
will not react adversely with either.
2. Remove the device from service and wipe the antenna clean using a cloth and suitable
cleaning solution.
Unit Repair and Excluded Liability
For detailed information, please see the inside back cover.
7ML19985XH81
Quick Start
SITRANS LR260 (HART) – QUICK START MANUAL Page EN-17