Simatic Pdm - Siemens sitrans LR260 (HART) Manual De Inicio Rápido

SITRANS LR260 Communications: HART
• You will need the full manual to acquire the list of applicable parameters.
• We recommend that you use SIMATIC Process Device Manager (PDM) to program your
device.

SIMATIC PDM

SIMATIC PDM is a software package used to commission and maintain SITRANS LR260 and
other process devices. Please consult the operating instructions or online help for details on
using SIMATIC PDM. (You can find more information at www.fielddevices.com: go to Products
and Solutions > Products and Systems > Communications and Software > Process Device
Manager.)
Device Description (EDD)
SITRANS LR260 requires the EDD for SIMATIC PDM version 6.0 with SP3, or higher.
Note:
• You can locate the EDD in Device Catalog, under Sensors/Level/Echo/Siemens
Milltronics/SITRANS LR260.
• Check the product page of our website at: www.siemens.com/LR260, under Downloads,
to make sure you have the latest version of SIMATIC PDM, the most recent Service Pack
(SP) and the most recent hot fix (HF). If you need to install a new EDD see
new device
below.
Configuring a new device
: Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
Note
parameters being updated.
1. Check that you have the most recent EDD, and if necessary download it from the product
page listed above. Save the files to your computer, and extract the zipped file to an easily
accessed location. Launch SIMATIC PDM – Manage Device Catalog, browse to the unzipped
EDD file and select it.
2. Launch SIMATIC Manager and create a new project for LR260. Application Guides for
setting up HART devices with SIMATIC PDM can be downloaded from the product page
of our website at: www.siemens.com/LR260.
3. Upload parameters to the PC/PG.
4. Configure the device via the Quick Start wizard (see page 17).
Page EN-16 SITRANS LR260 (HART) – QUICK START MANUAL
Configuring a
7ML19985XH81