Programming SITRANS LR260
A Quick Start Wizard provides an easy step-by-step guide to help you configure the device for
a simple application.
Quick Start Wizard via the handheld programmer
• 7-step
Quick Start Wizard via SIMATIC PDM
• 4-step
Settings can be modified locally via the Local User Interface (see
the handheld programmer
Interface(LUI) consists of an LCD display and a handheld programmer.
Activating SITRANS LR260
Keep infrared devices such as laptops, cell phones, and PDAs, away from
Note:
SITRANS LR260 to prevent inadvertent operation.
Power up the device. SITRANS LR260 automatically starts up in Measurement mode. Press
Mode
to toggle between Measurement and Program Mode.
The LCD Display
Measurement mode
1
2
LEVEL
18.91
21.40 °C
DATA EXCH.
8
6
7
Fault present
7 – text area displays a fault code and an error message
S: 0 LOE
8 – service required icon appears
1.
In response to a key press request. For details, see
7ML19985XH81
on page 12) or remotely via SIMATIC PDM. The Local User
1
(normal operation)
(((
3
4
1 – toggle indicator for linear units or %
2 – selected operation: level, space, or distance
[ ]
M
3 – measured value (level, space, or distance)
4 – units
5 – bar graph indicates level
6 – secondary region indicates on request
temperature, echo confidence, loop current, or distance
7 – text area displays status messages
5
8 – device status indicator
SITRANS LR260 (HART) – QUICK START MANUAL
on page 14.
on page 17.
Accessing parameters via
Key functions in Measurement mode
1
electronics
on page 11.
Page EN-9