Quick Start Wizard Via The Handheld Programmer - Siemens sitrans LR260 (HART) Manual De Inicio Rápido

Key Name
Clear
Decimal
point
Plus or
minus sign
Numeral
to

Quick Start Wizard via the handheld programmer

Notes:
• The Quick Start Wizard settings are inter-related and changes apply only after you click
on Yes in Apply?at the end of the Quick Start steps.
• Do not use the Quick Start wizard to modify individual parameters: see full parameter
listing in Instruction Manual (perform customization for your application only after the
Quick Start has been completed).
1. Quick Start
a) Point the programmer at the display (from a maximum distance of 500 mm [1.6 ft.]),
then press RIGHT arrow
b) Press RIGHT arrow
view.
c) Press RIGHT arrow
values and move directly to the next item.
d) To change a setting, scroll to the desired item or key in a new value.
e) After modifying a value, press RIGHT arrow
to move to the next item.
f) Quick Start settings take effect only after you click Yes in Apply? at the end of the
Quick Start steps.
1.1. Material
Options
1.2. Response Rate
Sets the reaction speed of the device to measurement changes in the target range.
Options
Use a setting just faster than the maximum filling or emptying rate (whichever is greater).
Page EN-14 SITRANS LR260 (HART) – QUICK START MANUAL
Function (continued)
Numeric
editing
Numeric
editing
Numeric
editing
Numeric
editing
to activate PROGRAM mode and open menu level 1.
twice to navigate to menu item 1. 1 and open parameter
to open Edit mode or DOWN arrow
STEEL (Default)
CONCRETE
SLOW 0.1 m/minute
MED 1.0 m/minute
FAST 10.0 m/minute (Default)
• Erases the display.
• Enters a decimal point.
• Changes the sign of the entered value.
• Enters the corresponding character.
to accept it and press DOWN arrow
to accept default
7ML19985XH81